HestiaLift is positioned to provide high-quality vertical up and down solutions for private high-end homes and spaces, German technology, and quality assurance.
Hestia seat elevator adopts mature production technology, which provides a safe, reliable, comfortable and convenient solution for users without elevator shafts in their homes.
Hstialift adopts the world's top hydraulic technology, and adopts multiple safety guarantee methods, which will not cause the phenomenon of punching and squatting. Compared with other ordinary wire rope elevators, it has higher safety performance. And the elevator is equipped with a backup battery, so when the elevator is out of power or malfunctions, press the emergency button at the bottom, and the hydraulic oil after the drain valve circuit is turned back to the tank slowly, the elevator will slowly drop by its own weight to achieve Self-rescue; if it is configured to open the door by hand, the elevator will not be trapped.
Hydraulic elevator for the building space savings comparison, hydraulic elevator machine room disposed flexible tubing rely on hydraulic drive power is transmitted, and therefore the position of the engine room in the range of from about 20 meters hoistway, an area of about 4-5㎡ use, it is not necessary room conventional manner provided at the top, reducing the vertical dimension of the hoistway. And is generally not necessary to provide hydraulic elevator counterweight means, it can increase the area of the hoistway utilization, efficient use of building space.
Hydraulic elevators have relatively low requirements for civil structures. Hydraulic elevators only need one load-bearing wall and no machine room. Due to the vertical load of the hydraulic elevator car such as its own weight and load, all hydraulic cylinders act on the foundation of the hoistway. Low requirements. It is because of the low of civil engineering requirements of this great advantage, a few years ago almost occupied most of the domestic elevator market.
The hydraulic lift is to rely on the principle of hydraulic jack lifting the car, with the valve open by the weight of the car, the car naturally decrease, energy saving and without taking into account the loss of the rope, the bottom of the pit to bear the weight, large load capacity, by adjusting number and diameter of the plunger can be safely and easily lift 50T load, the hydraulic power transmission system is uniformly smooth, and can achieve stepless speed elevator gentle curve, and therefore stable operation speed ladder superior comfort. Low cost, safe and reliable technical performance of routine maintenance.
For direct-acting hydraulic elevators, the structure is simple and the failure rate is low. The hydraulic elevator is not only equipped with the safety devices of universal traction elevators, but also has the following devices:
a) Overflow valve. Prevents excessive system pressure during upward movement.
b) Emergency manual valve. When a power failure occurs, the car can be lowered to the nearest floor position to open the hall and car door automatically to ensure that passengers can safely exit the car.
c) manual pump. When the system fails, the manual pump can be operated to release high pressure oil to make the car rise to the nearest floor position.
d) Piping rupture valve. When the hydraulic system pipeline is broken and the car stall is reduced, the oil circuit can be cut off automatically.
e) Fuel tank oil temperature protection. When the oil temperature in the fuel tank exceeds a certain value, the oil temperature protection device sends a signal to suspend the use of the elevator. When the oil temperature drops, the elevator can be started.
f) Heavy load. The hydraulic system has a large power-to-weight ratio, so an elevator of the same specification can carry a large weight.
g) Low noise. The hydraulic system can use low-noise screw pumps. At the same time, the pump and motor can be designed as submersible structure, forming a whole pumping station, which can greatly reduce the impact of noise.
h) Good explosion-proof performance. The hydraulic elevator uses low-condensing flame-retardant hydraulic oil, the fuel tank is integrally sealed, and the motor and hydraulic pump are immersed in the hydraulic oil, which can effectively prevent the combustion of combustible gas and liquid.
